Pentek DGD-5005 Spun Polypropylene Filter Cartridge, 10″ x 4-1/2″

Home/Whole House water filter/Pentek DGD-5005 Spun Polypropylene Filter Cartridge, 10″ x 4-1/2″

Pentek DGD-5005 Spun Polypropylene Filter Cartridge, 10″ x 4-1/2″

Amazon.com Price: $19.85 $10.31 (as of 04/03/2021 11:28 PST- Details)

Reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water
Combines two separate gradient layers for higher efficiency and dirt-loading capacity
Spun polypropylene for resistance to chemicals and bacteria

Description

This Pentek DGD-5005 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a waft rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for remedy of residential, commercial, and municipal drinking water.

Specifications

Nominal filtration rating (pre-filter)50 microns
Nominal filtration rating (post-filter)5 microns
Initial pressure drop at 10 gpm<1 psi
Temperature range40 to 145 degrees F (4.4 to 62.8 degrees C)
Maximum dimensions (H x W)10 x 4-1/2 inches (254 x 114 mm)
Materials certificationNSF/ANSI standard 42

The nominal filtration rating is for a particle removal efficiency of 85%.

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by way of a semipermeable barrier, adsorption, or biological processes. They’re made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems most often consist of a series of two or more types of filters, each designed to take away different contaminants. The performance of filters is measured by the minimum particle size that may be blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum waft rate, and the amount of water that may be filtered before the filter will have to be replaced. Water filters are used in a variety of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

Reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water
Combines two separate gradient layers for higher efficiency and dirt-loading capacity
Spun polypropylene for resistance to chemicals and bacteria
Initial pressure drop of less than 1 psi at a waft rate of 10 gpm
Temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C).

Additional information

Binding

Misc.

Brand

Pentek

CatalogNumberList

Pentek-DGD-5005

Color

White

EAN

7147905962507

EANList

7147905962507, 0851905124373, 0798527256207, 0115971036191, 7152555266295, 0132017513607, 0051678357439

ItemDimensions

1000, hundredths-inches, 450, hundredths-inches, 1.1, pounds, 450, hundredths-inches

Label

Pentair Industries

Manufacturer

Pentair Industries

Model

DGD-5005

MPN

155357-43

NumberOfItems

1

PackageDimensions

449, hundredths-inches, 992, hundredths-inches, 85, hundredths-pounds, 449, hundredths-inches

PackageQuantity

1

PartNumber

155357-43

ProductGroup

BISS

ProductTypeName

MECHANICAL_COMPONENTS

Publisher

Pentair Industries

Size

4-1-2" OD x 10" Length

Studio

Pentair Industries

UPC

115971036191

UPCList

115971036191, 051678357439, 798527256207, 132017513607, 851905124373