Pentek Polydepth (PD) Series Polypropylene Filter Cartridge

Home/Pentek water filter/Pentek Polydepth (PD) Series Polypropylene Filter Cartridge

Pentek Polydepth (PD) Series Polypropylene Filter Cartridge

Reduces sand, silt, scale, and rust particles in commercial drinking water and industrial fluid applications
Nominal filtration rating of 25 microns
Bonded polypropylene microfiber for resistance to chemicals and bacteria

Description

This Pentek polypropylene filter cartridge reduces sand, silt, scale, and rust particles in commercial drinking water and industrial fluid applications. It has a nominal filtration rating of 25 microns at an efficiency of 85%. The filter is made of thermally bonded polypropylene microfibers for resistance to chemicals and bacteria and minimal fiber release. It has an initial pressure drop of less than 2 pounds per square inch (psi) at a drift rate of 2 gallons per minute (gpm), and operates over a temperature range of 40 to 175 degrees F (4.4 to 79.4 degrees C). This polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for remedy of commercial drinking water and industrial filtration applications.SpecificationsNominal filtration rating25 micronsInitial pressure drop at 2 gpm<2 psiTemperature range40 to 175 degrees F (4.4 to 79.4 degrees C)Maximum dimensions (H x W) Materials certificationNSF/ANSI standard 42The nominal filtration rating is for a particle removal efficiency of 85%.H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Water filters remove undesirable particles, chemicals, and microorganisms from water by the use of a semipermeable barrier, adsorption, or biological processes. They're made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems normally consist of a series of two or more types of filters, each designed to take away different contaminants. The performance of filters is measured by the minimum particle size that may be blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum drift rate, and the amount of water that may be filtered before the filter should be replaced. Water filters are used in a variety of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance. Reduces sand, silt, scale, and rust particles in commercial drinking water and industrial fluid applications Nominal filtration rating of 25 microns Bonded polypropylene microfiber for resistance to chemicals and bacteria Initial pressure drop of less than 2 psi at a drift rate of 2 gpm Temperature range of 40 to 175 degrees F (4.4 to 79.4 degrees C) [amz_corss_sell asin="B00BI4HWSU"]

Additional information

Binding

PartNumber

, , , , , , , , ,

Size

, , , , , , ,

Brand

Label

Manufacturer

PackageQuantity

ProductGroup

ProductTypeName

Publisher

Studio