Pentek S1-20 Pleated Cellulose Filter Cartridge, 20″ x 2-5/8″, 20 Micron

This Pentek S1-20 pleated cellulose filter cartridge reduces sand, dirt, silt, rust, and scale particles in residential and commercial water. It has a nominal filtration rating of 20 microns at an efficiency of 85%. The filter is made of cellulose media pleated around a polypropylene core for strength. It has an initial pressure drop of 0.8 pounds per square inch (psi) at a waft rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This pleated filter cartridge is to be used in quite a lot of applications, including drinking water purification, irrigation, and industrial processes, among others.

Specifications

The nominal filtration rating is for a particle removal efficiency of 85%.

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by the use of a semipermeable barrier, adsorption, or biological processes. They’re made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems usually consist of a series of two or more types of filters, each designed to take away different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum waft rate, and the amount of water that may be filtered before the filter should be replaced. Water filters are used in a variety of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.