Pentek NCP Series Pleated Carbon-Impregnated Filter Cartridge, 10 Micron

Home/Pentek water filter/Pentek NCP Series Pleated Carbon-Impregnated Filter Cartridge, 10 Micron

Pentek NCP Series Pleated Carbon-Impregnated Filter Cartridge, 10 Micron

Reduces sediment and chlorine taste and odor in residential and municipal drinking water
Nominal filtration rating of 10 microns
Carbon-impregnated polyester media pleated around a polypropylene core for strength and resistance to bacteria

Description

This Pentek carbon-impregnated polyester filter cartridge reduces sediment and chlorine taste and odor in residential and municipal drinking water. It has a nominal filtration rating of 10 microns at an efficiency of 85%. The filter will reduce free to be had chlorine (FAC) at 2 parts per million (ppm) by at least 50% in up to at a float rate of 2 gallons per minute (gpm). The cartridge is made of carbon-impregnated polyester media pleated around a rigid polypropylene core with plastisol end caps for strength and resistance to bacteria. It has an initial pressure drop of 2 pounds per square inch (psi) at a beneficial float rate of 8 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This filter cartridge is to be used in rural, residential, and municipal drinking water purification.Specifications Nominal filtration rating 10 microns Initial pressure drop at 8 gpm 2 psi Chlorine reduction capacity 500 gallons at 2 gpm Operating temperature range 40 to 125 degrees F (4.4 to 51.7 degrees C) Maximum dimensions (H x W) 9-3/4 x 4-1/2 inches (248 x 114 mm)The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free to be had chlorine (FAC) at a concentration of 2 ppm is reduced by at least 50%.H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Water filters remove undesirable particles, chemicals, and microorganisms from water by way of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems normally consist of a series of two or more types of filters, each designed to take away different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum float rate, and the amount of water that may be filtered before the filter will have to be replaced. Water filters are used in a variety of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Reduces sediment and chlorine taste and odor in residential and municipal drinking water
Nominal filtration rating of 10 microns
Carbon-impregnated polyester media pleated around a polypropylene core for strength and resistance to bacteria
Initial pressure drop of 2 psi at a float rate of 8 gpm
Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)

Additional information

Binding

Misc.

Size

20" H x 2-1-2" W, 20" H x 4-1-2" W, 9-3-4" H x 2-1-2" W, 9-3-4" H x 4-1-2" W

Brand

Pentair

Label

Pentair Industries

Manufacturer

Pentair Industries

PackageQuantity

1

ProductGroup

BISS Basic

ProductTypeName

MECHANICAL_COMPONENTS

Publisher

Pentair Industries

Studio

Pentair Industries