Pentek ECP Series Pleated Cellulose Filter Cartridge
Reduces sand, dirt, silt, rust, and scale particles in residential and commercial water
Nominal filtration rating of 1 micron
Resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength
Description
This Pentek pleated cellulose polyester filter cartridge reduces sand, dirt, silt, rust, and scale particles in residential and commercial water. It has a nominal filtration rating of 1 micron at an efficiency of 85%. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. It has an initial pressure drop of less than 1 pound per square inch (psi) at a go with the flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This pleated cellulose polyester filter cartridge is to be used in quite a lot of applications, including drinking water purification, irrigation, and industrial processes, among others.SpecificationsNominal filtration rating1 micronInitial pressure drop at 10 gpm<1 psiTemperature range40 to 125 degrees F (4.4 to 51.7 degrees C)Maximum dimensions (H x W) The nominal filtration rating is for a particle removal efficiency of 85%.H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Water filters remove undesirable particles, chemicals, and microorganisms from water by way of a semipermeable barrier, adsorption, or biological processes. They're made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems in most cases consist of a series of two or more types of filters, each designed to take away different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum go with the flow rate, and the amount of water that may be filtered before the filter will have to be replaced. Water filters are used in quite a lot of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance. Reduces sand, dirt, silt, rust, and scale particles in residential and commercial water Nominal filtration rating of 1 micron Resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength Initial pressure drop of less than 1 psi at a go with the flow rate of 10 gpm Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C) [amz_corss_sell asin="B00BI4HSSE"]
Additional information
Binding | |
---|---|
Size | 20" H x 2-5-8" W, 1 Micron, 20" H x 2-5-8" W, 20 Microns, 20" H x 2-5-8" W, 5 Microns, 20" H x 2-5-8" W, 50 Microns, 20" H x 4-1-2" W, 1 Micron, 20" H x 4-1-2" W, 20 Microns, 20" H x 4-1-2" W, 5 Microns, 20" H x 4-1-2" W, 50 Microns, 9-3-4" H x 2-5-8" W, 1 Micron, 9-3-4" H x 2-5-8" W, 5 Microns, 9-3-4" H x 2-5-8" W, 50 Microns, 9-3-4" H x 4-1-2" W, 20 Microns, 9-3-4" H x 4-1-2" W, 5 Microns, 9-3-4" H x 4-1-2" W, 50 Microns, 9-3-4" x 2-5-8", 20 Microns |
Brand | |
Label | |
Manufacturer | |
PackageQuantity | |
ProductGroup | |
ProductTypeName | |
Publisher | |
Studio |