Pentek DGD-7525 Spun Polypropylene Filter Cartridge, 10″ x 4-1/2″

Home/Pentek water filter/Pentek DGD-7525 Spun Polypropylene Filter Cartridge, 10″ x 4-1/2″

Pentek DGD-7525 Spun Polypropylene Filter Cartridge, 10″ x 4-1/2″

Amazon.com Price:  $15.88 (as of 16/04/2024 02:05 PST- Details)

Reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water
Combines two separate gradient layers for higher efficiency and dirt-loading capacity
Spun polypropylene for resistance to chemicals and bacteria

Description

This Pentek DGD-7525 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filter layer is 75 microns, and the rating of the post-filter layer is 25 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch (psi) at a drift rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for remedy of residential, commercial, and municipal drinking water.

Specifications

Nominal filtration rating (pre-filter)75 microns
Nominal filtration rating (post-filter)25 microns
Initial pressure drop at 10 gpm<1 psi
Temperature range40 to 145 degrees F (4.4 to 62.8 degrees C)
Maximum dimensions (H x W)10 x 4-1/2 inches (254 x 114 mm)
Materials certificationNSF/ANSI standard 42

The nominal filtration rating is for a particle removal efficiency of 85%.

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by way of a semipermeable barrier, adsorption, or biological processes. They’re made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems generally consist of a series of two or more types of filters, each designed to take away different contaminants. The performance of filters is measured by the minimum particle size that may be blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum drift rate, and the amount of water that may be filtered before the filter will have to be replaced. Water filters are used in quite a lot of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

Reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water
Combines two separate gradient layers for higher efficiency and dirt-loading capacity
Spun polypropylene for resistance to chemicals and bacteria
Initial pressure drop of less than 1 psi at a drift rate of 10 gpm
Temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C).

Additional information

Binding

Misc.

Brand

Pentek

CatalogNumberList

Pentek-DGD-7525

Color

White

EAN

0163120791293

EANList

0163120791293, 0051678355435, 0806294984152, 0115971036313, 0798527292694, 0851905131449, 0132017513706, 0700999877712, 0182682387621

ItemDimensions

1000, hundredths-inches, 450, hundredths-inches, 79, hundredths-pounds, 450, hundredths-inches

Label

Pentair Industries

Manufacturer

Pentair Industries

Model

DGD-7525

MPN

155355-43

NumberOfItems

1

PackageDimensions

450, hundredths-inches, 1000, hundredths-inches, 80, hundredths-pounds, 450, hundredths-inches

PackageQuantity

1

PartNumber

155355-43

ProductGroup

BISS

ProductTypeName

MECHANICAL_COMPONENTS

Publisher

Pentair Industries

Studio

Pentair Industries

UPC

851905131449

UPCList

851905131449, 798527292694, 163120791293, 182682387621, 115971036313, 051678355435, 132017513706, 806294984152, 700999877712