Amazon.com Price: $136.00$128.20 (as of 29/03/2023 23:42 PST- Details)
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
The PF-2 is for use with Black Berkey Purifiers – If you use ceramic filters, you will need the PF-4
Primarily Filters Fluoride and Arsenic
Attaches to the bottom of a Black Berkey Purifier – Used as a Post-Filter
The PF-2 is To be used with Black Berkey Purifiers – If you use ceramic filters, you’re going to need the PF-4 *** PF-2 reduction elements are designed To be used together with Black Berkey water purification elements to adsorb the following unwanted elements found in drinking water. Fluoride, Arsenic V and pre oxidized Arsenic III, Other residual heavy metal ions. FLUORIDE: Testing for fluoride was once based on 20-30ppm of the ion in the influent aqueous solution at a waft rate of not more than 3 gpm per cubic foot of media. Results of < 1ppm of the fluoride ion in the effluent were typical for the media (95% reduction). Under optimum conditions, effluent concentrations of less than 50 ppb were readily achieved (99.75% reduction). ARSENIC: This product uniquely targets all the family of arsenic oxide anions in addition to the arsenic cations. REPLACEMENT: Under normal conditions it's endorsed that each set of two PF-2 elements be replaced after 1,000 gallons.
The PF-2 is To be used with Black Berkey Purifiers - If you use ceramic filters, you're going to need the PF-4
Primarily Filters Fluoride and Arsenic
Attaches to the bottom of a Black Berkey Purifier - Used as a Post-Filter
To be used with Big Berkey, Commute Berkey, Berkey Light, Royal Berkey, Imperial Berkey, Crown Berkey
[amz_corss_sell asin="B00BWIWYBW"]
